Instrumentation System & Driver Information Center: Specifications Subaru Outback BS

SPECIFICATION

Since the meter case assembly cannot be disassembled, do not remove or inspect the speedometer alone. (Do not remove the cover on the back surface.)

Since the meter case assembly cannot be disassembled, do not remove or inspect the tachometer alone. (Do not remove the cover on the back surface.)

Since the meter case assembly cannot be disassembled, do not remove or inspect the fuel gauge alone. (Do not remove the cover on the back surface.)

Since the meter case assembly cannot be disassembled, do not remove or inspect the ECO gauge alone. (Do not remove the cover on the back surface.)

Note. Equipped on the model with luminescent meter. Since the meter case assembly cannot be disassembled, do not remove or inspect the engine coolant temperature gauge alone. (Do not remove the cover on the back surface.)

Scheme 12

Scheme 13

1. Remove the center speaker cover. NOTE: If the cover is hard to remove, first remove the audio assembly or navigation assembly, and then push up the cover from the backside. Push up the center speaker cover from the audio space. Disconnect the claws and hooks and remove the center speaker cover.
2. Remove the multi display. CAUTION: Be careful not to damage the multi display or instrument panel. Release the clips and claws, detach the multi display panel LWR. Remove the screws and pull out the multi display toward you to disconnect the connectors.

See also:
• BASIC DIAGNOSTIC PROCEDURE
• BASIC DIAGNOSTIC PROCEDURE