Home ReviewsRefund
Home/Subaru/Outback/Subaru Outback BS (2014-2018)/Repair manual/Continuously Variable Transaxle (Cvt): Removal & Installation/REMOVAL
Contents Wiring diagrams Section: Continuously Variable Transaxle (Cvt): Removal & Installation All sections

REMOVAL Subaru Outback BS

Continuously Variable Transaxle (Cvt): Removal & Installation 1 illustration

REMOVAL

CAUTIONBe sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.

Scheme 500

Scheme 500
Scheme 500
  1. Lift up the vehicle.
  2. Remove the harness connector from turbine speed sensor.
  3. Remove the turbine speed sensor.