Home ReviewsRefund
Home/Subaru/Outback/Subaru Outback BS (2014-2018)/Repair manual/Communication Devices/Lan Communication System (Diagnostics): Specifications
Contents Wiring diagrams Section: Communication Devices All sections

Lan Communication System (Diagnostics): Specifications Subaru Outback BS

Communication Devices ~230 words

ELECTRICAL SPECIFICATION

  1. Body integrated unit For I/O signals of the body integrated unit, refer to «CONTROL MODULE I/O SIGNAL»(ref-645973-S20076964392014072500000).
  2. Engine control module For I/O signals of ECM, refer to «ENGINE CONTROL MODULE (ECM) I/O SIGNAL»(/subaru/outback/bs-2014-2018/remont/testing-diagnostics/#engine-controls-diagnostics-h4do) (H4DO) or «ENGINE CONTROL MODULE (ECM) I/O SIGNAL»(/subaru/outback/bs-2014-2018/remont/testing-diagnostics/#engine-controls-diagnostics-h6do) (H6DO).
  3. Transmission control module For I/O signals of TCM, refer to «TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL»(ref-646013-S15369732852014072500000) (5AT).
  4. VDC control module For I/O signals of VDC CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-646008-S37731691792014072500000).
  5. Electronic parking CM For I/O signals of electronic CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-646014-S07073087552014072500000).
  6. A/C CM For unit I/O signals of A/C CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-646028-S28283217102014072500000).
  7. Combination meter For I/O signals of combination meter, refer to Combination Meter System. See appropriate SYSTEM WIRING DIAGRAM article.
  8. Stereo camera For I/O signals of stereo camera, refer to «STEREO CAMERA»(ref-645976-S17377678082014072500000).
  9. Data link connector For I/O signals of data link connector, refer to «DATA LINK CONNECTOR»(/subaru/outback/bs-2014-2018/remont/testing-diagnostics/#engine-controls-diagnostics-h4do) (H4DO) or «DATA LINK CONNECTOR»(/subaru/outback/bs-2014-2018/remont/testing-diagnostics/#engine-controls-diagnostics-h6do) (H6DO).
  10. Airbag CM For I/O signals of the airbag CM, refer to «AIRBAG CONTROL MODULE I/O SIGNAL»(ref-646033-S06334695332014072500000).
  11. Keyless access CM For I/O signals of keyless access CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-645971-S32361974932014072500000). * CAN sleep state: Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.

More articles — Lan Communication System (Diagnostics)