Lan Communication System (Diagnostics): Specifications Subaru Outback BR facelift

ELECTRICAL SPECIFICATION

1. Body integrated unit For I/O signals of the body integrated unit, refer to CONTROL MODULE I/O SIGNAL.
2. Engine control module For I/O signals of ECM, refer to ENGINE CONTROL MODULE (ECM) I/O SIGNAL (H4DO) or ENGINE CONTROL MODULE (ECM) I/O SIGNAL (H6DO).
3. Transmission control module For I/O signals of TCM, refer to TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL (5AT).
4. VDC control module For I/O signals of VDC CM, refer to CONTROL MODULE I/O SIGNAL.
5. Electronic parking CM For I/O signals of electronic CM, refer to CONTROL MODULE I/O SIGNAL.
6. A/C CM For unit I/O signals of A/C CM, refer to CONTROL MODULE I/O SIGNAL.
7. Combination meter For I/O signals of combination meter, refer to Combination Meter System. See appropriate SYSTEM WIRING DIAGRAM article.
8. Stereo camera For I/O signals of stereo camera, refer to STEREO CAMERA.
9. Data link connector For I/O signals of data link connector, refer to DATA LINK CONNECTOR (H4DO) or DATA LINK CONNECTOR (H6DO).
10. Airbag CM For I/O signals of the airbag CM, refer to AIRBAG CONTROL MODULE I/O SIGNAL.
11. Keyless access CM For I/O signals of keyless access CM, refer to CONTROL MODULE I/O SIGNAL. * CAN sleep state: Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.

See also:
• DIAGNOSTICS FOR ENGINE STARTING FAILURE
• DIAGNOSTICS FOR ENGINE STARTING FAILURE