POWER WINDOW RELAY
To access relay, remove passenger-side seat. Remove cover side plate and roll up floor mat. Remove relay. Using ohmmeter, check continuity between relay terminals. (Scheme 3) Continuity should be present between terminals No. 1 and 3. With battery voltage applied to terminals No. 1 and 3, continuity should not be present between terminals No. 2 and 4.
Scheme 3
POWER WINDOW SWITCH
Remove control switch from door panel. Using ohmmeter, check continuity of switch. Use illustration for switch terminal identification. (Scheme 4)- (Scheme 6). Replace appropriate switch as necessary if switch continuity is not as specified. (Scheme 6)
