Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Subaru Impreza GC/GF

Procedures ~103 words

WHEEL & TIRE SPECIFICATIONS

Tire specifications are imprinted on the tire side wall. The recommended cold tire inflation pressures are listed on a label attached to the left center pillar.

CAUTIONAll 4 tires on vehicle must be of the same size, construction and load range. DO NOT mix tires of different design such as radial with bias or belted bias tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. To prevent vehicle and tire damage, DO NOT use tire chains on the T-type compact spare tire.

WHEEL TIGHTENING

Tighten all wheel lug nuts to 58-72 ft. lbs. (78-98 N.m). Always tighten wheel lug nuts in a crisscross pattern.

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section.

Under normal conditions, battery delivered with vehicle is maintenance-free and does not require additional water. However, under severe conditions it is advisable to check battery fluid periodically. Use only distilled water to fill battery cell to the upper mark on battery case should it becomes necessary.