TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Backing Plate Mounting Bolts | 34-43 (46-58) |
| Booster Mounting Nut | 9-17 (12-23) |
| Brakeline-To-Caliper | 10-13 (14-18) |
| Brakeline-To-Master Cylinder | 10-13 (14-18) |
| Brakeline-To-Wheel Cylinder | 10-13 (14-18) |
| Caliper Guide Pin |
| Dual Piston | 25-32 (34-44) |
| Single Piston | 16-23 (22-31) |
| Caliper Pin Bolt | 23-30 (31-41) |
| Caliper-To-Support Bolt (Rear) | 16-23 (22-31) |
| Hill-Holder |
| PHV Bracket | 22-27 (30-36) |
| PHV Mount | 9-17 (12-23) |
| Master Cylinder Mounting Nut | 7-13 (10-18) |
| Parking Brake Cable Bracket Bolts | 17-27 (23-37) |
| Proportioning Valve Bolts | 9-17 (13-23) |
| Support Bracket Mounting Bolts |
| Front | 50-65 (68-88) |
| Rear | 34-43 (46-58) |
| Wheel Bearing Nut | 123-152 (167-206) |
| Wheel Lug Nut | 58-72 (79-98) |
| INCH Lbs. (N.m) |
| Bleeder Screw | 61.2-78.0 (7.0-9.0) |
| Master Cylinder Stop Bolt | 12.0-24.0 (1.4-2.7) |
| PHV Cable Lock Nut | 21.6-39.6 (2.5-4.4) |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Disc Rotor Diameter |
| Front |
| AWD, FWD Except Base | 10.24 (260) |
| Base FWD | 9.53 (242) |
| Rear | 10.47 (266) |
| Lateral Runout (Front Or Rear) | .004 (.10) |
| Parallelism | (1) |
| Original Rotor Thickness |
| Front |
| AWD, FWD Except Base | .94 (24.0) |
| Base FWD | .71 (18.0) |
| Rear | .39 (10.0) |
| Minimum Refinish Thickness | (1) |
| Discard Thickness | (1) |
| Master Cylinder Diameter |
| With ABS | 1.0 (25.4) |
| Without ABS | .94 (24.0) |
| (1) Information is not available at time of publication. |
| (1) | Information is not available at time of publication. |
DISC BRAKE SPECIFICATIONS (IMPREZA)
| Application | In. (mm) |
|---|
| Disc Rotor Diameter |
| Front | 10.24 (260) |
| Rear | 10.47 (266) |
| Lateral Runout |
| Front | .002 (.05) |
| Rear | .004 (.10) |
| Parallelism | (1) |
| Original Rotor Thickness |
| Front | .94 (24.0) |
| Rear | .39 (10.0) |
| Minimum Refinish Thickness |
| Front | .87 (22.0) |
| Rear | .34 (8.5) |
| Discard Thickness | (1) |
| Master Cylinder Diameter | 1.059 (26.9) |
| (1) Information is not available at time of publication. |
| (1) | Information is not available at time of publication. |
DISC BRAKE SPECIFICATIONS (LEGACY)
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Drum Diameter |
| Without ABS | 9.00 (229.0) |
| With ABS (1) | 6.69 (170.0) |
| Maximum Refinish Diameter |
| Without ABS | 9.08 (231.0) |
| With ABS (1) | 6.73 (171.0) |
| Discard Diameter | (2) |
| Wheel Cylinder Diameter |
| Sedan & Coupe | .75 (19) |
| Wagon | .79 (19.0) |
| (1) Parking brake drum located inside rear disc rotor. (2) Any diameter greater than maximum refinish diameter. |
| (1) | Parking brake drum located inside rear disc rotor. |
| (2) | Any diameter greater than maximum refinish diameter. |
DRUM BRAKE SPECIFICATIONS
