SPOT MAP LIGHT SWITCH
Measure the spot map light resistance.
Scheme 49
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | 1 and 2 | 1 Mohms or more |
| ON | 1 and 2 | 18±5.4 ohms |
CONTINUITY REFERENCE
Replace the spot map light if faulty.
Scheme 50
Scheme 51
- Disconnect the ground cable from the battery.
- Remove the lens (A) and mounting screws (B).
- Disconnect the harness connector and remove the room light.
Install in the reverse order of removal.