Home ReviewsRefund
Home/Subaru/Forester/Subaru Forester SH (2007-2011)/Repair manual/Wiper/washer Systems/Mechanism & Function -- Wiper System & Washer System: Speci…
Contents Wiring diagrams Section: Wiper/washer Systems All sections

Mechanism & Function -- Wiper System & Washer System: Specifications Subaru Forester SH

Wiper/washer Systems 1 illustration

SPECIFICATIONS

Washer tankCapacity4.0 L (4.2 US qt, 3.5 lmp qt)
Wiper motorRated voltage12V
No-load current4 A or less
Speed [at 2.0 N.m (20 kg-cm, 17 in-lb)]HIGH56-68 rpm
LOW35-45 rpm
Motor characteristics when boundHIGHTorque25.5 N.m (260 kg-cm, 1.88 ft-lb) or more
Current33 A or less
LOWTorque31.4 N.m (320 kg-cm, 2.31 ft-lb) or more
Current29.0 A or less
Wiper bladeLengthDriver side600 mm (23.62 in)
Passenger side450 mm (17.72 in)

FRONT WASHER SPECIFICATIONS

Scheme 1

Scheme 1: REAR WIPER
Scheme 1: REAR WIPER
  1. The rear wiper operates over an angle of 168°.
  2. The rear wiper operates intermittently as shown in the following table only when the wiper switch is in the INT position on AT models.
Selector lever position (AT models only)Vehicle speed km/h (MPH)Interval (sec)
Wagon
Reverse (R)Continuous operation
Other than reverse (R)0-20 (0-12.4)12
20-50 (12.4-31.1)9
50-80 (31.1-49.7)6
Over 80 (49.7)3

REAR WIPER SPECIFICATIONS

Wiper motorRated voltage12V
No-load current2 A or less
Speed [at 0.5 N.m (5 kg-cm, 4.3 in-lb)]25 rpm or more
Motor characteristics when boundTorque8.8 N.m (0.90 kgf-m, 6 ft-lb) or more
Current13 A or more
Wiper bladeLength350 mm (13.78 in)

REAR WASHER SPECIFICATIONS

More articles — Mechanism & Function -- Wiper System & Washer System