Home ReviewsRefund
Home/Subaru/Forester/Subaru Forester SH (2007-2011)/Repair manual/Engine Mechanical (H4DOTC)/TIMING BELT
Contents Wiring diagrams Section: Engine Mechanical (H4DOTC) All sections

TIMING BELT Subaru Forester SH

Engine Mechanical (H4DOTC) 1 illustration

TIMING BELT

  1. Check the timing belt teeth for breaks, cracks or wear. If any fault is found, replace the timing belt.
  2. Check the condition on the back surface of the timing belt. If cracks are found, replace the timing belt.
CAUTIONBe careful not to let oil, grease or coolant contact the timing belt. Remove quickly and thoroughly if this happens. Do not bend the timing belt sharply.

In radial diameter h: 60 mm (2.36 in) or more

Scheme 466

Scheme 466
Scheme 466