MAINTENANCE SERVICE INTERVAL
Note. Only vehicles listed in this index have a Maintenance Service Interval reset.
| Model & Year | Reset Procedure | |
|---|---|---|
| Fortwo | ||
| 2008-11 | Maintenance Service Interval Reset - Procedure 1 | |
| 2012-15 | Maintenance Service Interval Reset - Procedure 2 | |
MAINTENANCE SERVICE INTERVAL RESET INDEX
MAINTENANCE SERVICE INTERVAL RESET - PROCEDURE 1
Note. Some models (not all) may be equipped with one or more resettable maintenance reminder lights indicating maintenance is required. Once required maintenance services are performed, resetting of lights may be required. Information is provided to reset these lights where applicable.
Note. Most vehicles are equipped with a Malfunction Indicator Light (MIL) or check engine light. If light comes on and remains on while driving, the vehicle requires some type of repair. See appropriate service and repair information. After repairing fault(s) and clearing fault code(s), the Malfunction Indicator Light (MIL) or check engine light should go out. After performing required service, reset indicator light.
MAINTENANCE SERVICE INTERVAL RESET - PROCEDURE 2
- Selecting Maintenance Service Interval Display: Press service interval button (1 - see scheme 1) on the instrument cluster repeatedly until the maintenance service interval display appears in the status indicator. Depending on the type of maintenance service that is due (1 wrench = Care Service; 2 wrenches = Maint Service), is displayed.
- Clearing Maintenance Service Interval Display: Press service interval button (1) once. The maintenance service interval display is cleared.
- Activating Maintenance Service Interval Display: Press service interval button (1) twice in quick succession.
TPMS RESET - PROCEDURE 1
The TPMS must be restarted when you have adjusted the tire inflation pressure to a new level (e.g. because of different load or driving conditions). The TPMS sets new reference values for each tire. The TPMS is then recalibrated to the current tire inflation pressures.
Press the Restarting TPMS button. (Scheme 1) The combination low tire pressure/TPMS malfunction telltale in the instrument cluster flashes for approximately 5 seconds and then goes out. After driving a few minutes the system verifies that the current tire inflation pressures are within the systems specified range. Afterwards the current tire inflation pressures are accepted as reference pressures and then monitored.
