Audio / Visual (Service Information): Overview Scion xD I

Scheme 7

Scheme 8

1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY HINT: Remove interior parts so that the front No. 1 speaker can be seen. Check the speaker installation. OK The speaker is securely installed. If the result is not as specified, reinstall the front No. 1 speaker. Visually check the speaker. OK The cone paper of the speaker is not torn. If the result is not as specified, replace the front No. 1 speaker. Check the speaker resistance Disconnect the speaker connector. Using an ohmmeter, measure the resistance between the terminals. Standard resistance Tester Connection Condition Specified Condition 1 - 2 Always Approximately 4 ohms If the result is not as specified, replace the front No. 1 speaker.
2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY HINT: Remove interior parts so that the front No. 2 speaker can be seen. Check the speaker installation. OK The speaker is securely installed. If the result is not as specified, reinstall the front No. 2 speaker. Visually check the speaker. OK The cone paper of the speaker is not torn. If the result is not as specified, replace the front No. 2 speaker.

See also:
• REMOVAL - Step 9
• REMOVAL - Step 1