TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Generator At Engine | ||||
| Bolt A | 19 | 189 | 14 | |
| Bolt B | 54 | 550 | 40 | |
| Vane Pump At Engine | 44 | 449 | 33 | |
| Camshaft Bearing Cap No. 2 At Cylinder Head Sub-Assy | 13 | 129 | 9.4 | |
| Camshaft Bearing Cap No. 1 At Cylinder Head Sub-Assy | 23 | 235 | 17 | |
| Camshaft Timing Gear Or Sprocket At Camshaft No. 2 | 64 | 653 | 47 | |
| Screw Plug At Oil Pump Assy | 15 | 153 | 11 | |
| Ignition Coil No. 1 At Cylinder Head Cover Sub-Assy | 9.0 | 92 | 80 in.lbf | |
| No. 1 Engine Hanger At Cylinder Head Sub-Assy | 40 | 408 | 30 | |
| Engine Oil Pressure Switch Assy At Cylinder Block Sub-Assy | 15 | 150 | 11 | |
| Knock Sensor At Cylinder Block Sub-Assy | 44 | 450 | 33 | |
| Engine Coolant Temperature Sensor At Cylinder Head Sub-Assy | 20 | 204 | 15 | |
| Oil Level Gage Guide At Cylinder Block Sub-Assy | 9.0 | 92 | 80 in.lbf | |
| Water By-Pass Pipe No. 1 At Cylinder Head & Block | 9.0 | 92 | 80 in.lbf | |
| Exhaust Manifold At Cylinder Head Sub-Assy | 27 | 275 | 20 | |
| Exhaust Manifold Heat Insulator No. 1 At Exhaust Manifold | 8.0 | 82 | 71 in.lbf | |
| Manifold Support Bracket At Cylinder Block Sub-Assy | 37 | 377 | 27 | |
| Booster Vacuum Tube At Cylinder Head Sub-Assy | 9.0 | 92 | 80 in.lbf | |
| Engine Mounting Insulator LH At Engine Mounting Bracket LH | 49 | 500 | 36 | |
| Engine Mounting Insulator RR At Engine Mounting Bracket RR | 64 | 653 | 47 | |
| Engine Mounting Insulator RH At Body | ||||
| Bolt A | 45 | 459 | 33 | |
| Bolt B | 52 | 530 | 38 | |
| Nut | 52 | 530 | 38 | |
| Bolt C | 9.8 | 100 | 7.2 | |
| Front Suspension Crossmember Sub-Assy At Body | ||||
| Bolt A | 116 | 1,183 | 86 | |
| Bolt B | 70 | 714 | 52 | |
| Front Suspension Arm Sub-Assy Lower No. 1 LH At Steering Knuckle | 98 | 999 | 72 | |
| Front Axle Hub LH Nut At Front Drive Shaft | 216 | 2,203 | 160 | |
| Tie Rod End Sub-Assy LH At Steering Knuckle | 49 | 500 | 36 | |
| Speed Sensor Front LH At Steering Knuckle | 8.0 | 82 | 71 in.lbf | |
| Cylinder Head Cover No. 2 At Cylinder Head Cover Sub-Assy | 7.0 | 71 | 62 in.lbf | |
| Cylinder Head Cover Sub-Assy At Cylinder Head Sub-Assy | 10 | 102 | 7.4 | |
| Oil Pan Drain Plug At Oil Pan No. 2 | 38 | 382 | 28 | |
| Cylinder Head Sub-Assy At Cylinder Block Sub-Assy | ||||
| 1st | 29 | 300 | 22 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| Intake Manifold At Cylinder Head Sub-Assy | 30 | 306 | 22 | |
| Exhaust Pipe Assy Front At Exhaust Manifold | 43 | 438 | 32 | |
| Drive Plate & Ring Gear At Crankshaft A/T | 88 | 900 | 65 | |
| Flywheel At Crankshaft | ||||
| M/T | — | — | — | |
| 1st | 49 | 500 | 36 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Stud Bolt At Oil Pan No. 1 | 5.0 | 51 | 44 in.lbf | |
| Oil Pan No. 1 At Cylinder Block | 24 | 245 | 18 | |
| Oil Strainer At Oil Pan No. 1 | 11 | 112 | 8.1 | |
| Oil Pan No. 2 At Oil Pan No. 1 | 9.0 | 92 | 80 in.lbf | |
| Oil Filter Union At Oil Pan No. 1 | 30 | 306 | 22 | |
| Camshaft Timing Gear Assembly At Camshaft | 64 | 653 | 47 | |
| Camshaft Position Sensor At Cylinder Head | 8.0 | 82 | 71 in.lbf | |
| Chain Vibration Damper At Cylinder Block | 9.0 | 92 | 80 in.lbf | |
| Chain Tensioner At Cylinder Block | 9.0 | 92 | 80 in.lbf | |
| Oil Pump Assy At Cylinder Head & Block | ||||
| Bolt A | 24 | 245 | 18 | |
| Bolt B | 11 | 112 | 8.1 | |
| Bolt C | 11 | 112 | 8.1 | |
| Nut D | 24 | 245 | 18 | |
| Bolt E | 24 | 245 | 18 | |
| Water Pump At Oil Pump Assy | 11 | 112 | 8.1 | |
| Engine Mounting Bracket RH At Oil Pump Assy | 55 | 561 | 41 | |
| Water Pump Pulley At Water Pump | 15 | 153 | 11 | |
| Crankshaft Damper At Crankshaft | 128 | 1,305 | 95 | |
| Fuel Delivery Pipe At Cylinder Head | ||||
| Bolt A | 19 | 194 | 14 | |
| Bolt B | 9.0 | 92 | 80 in.lbf | |
| Crankshaft Position Sensor At Oil Pump Assy | 7.5 | 76 | 66 in.lbf | |
| Water Inlet At Cylinder Block | 9.0 | 92 | 80 in.lbf | |
| Camshaft Timing Oil Control Valve At Cylinder Head | 7.5 | 76 | 66 in.lbf | |
| Spark Plug At Cylinder Head | 18 | 184 | 13 | |
| Stud Bolt At Cylinder Head | ||||
| Bolt A | 10 | 102 | 7.4 | |
| Bolt B | 4.0 | 41 | 35 in.lbf | |
| Bolt C | 10 | 102 | 7.4 | |
| Bolt D | 9.0 | 92 | 80 in.lbf | |
| Oil Control Valve Filter Plug At Cylinder Head | 30 | 306 | 22 | |
| Connecting Rod Cap At Connecting Rod | ||||
| 1st | 15 | 153 | 11 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Crankshaft Bearing Cap At Cylinder Block | ||||
| 1st | 22 | 224 | 16 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Water Drain Cock At Cylinder Block | 35 | 357 | 26 | |
| Stud Bolt At Cylinder Block | 5.0 | 51 | 44 in.lbf | |
| Chain Tensioner Slipper At Cylinder Block | 9.0 | 92 | 80 in.lbf | |
| Ventilation Valve At Cylinder Head | 27 | 275 | 20 | |
| W/Head Taper Screw Plug No. 1 At Cylinder Head | 44 | 449 | 33 | |
| Front Suspension Member Reinforcement At Body | 47 | 479 | 35 | |
| Water Filler At Radiator | 7.5 | 76 | 66 in.lbf | |
TORQUE SPECIFICATIONS