TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| VANE PUMP ASSY | ||||
| Vane Pump Housing Rear At Vane Pump Housing Front | 22 | 224 | 16 | |
| Power Steering Oil Pressure Sensor | 21 | 214 | 15 | |
| Pressure Port Union | 69 | 704 | 51 | |
| Pump Bracket Front At Vane Pump Bracket Rear | 44 | 449 | 32 | |
| Oil Reservoir Set Bolt | 9.0 | 92 | 80 in.lbf | |
| Vane Pump Assy Set Bolt | 44 | 449 | 32 | |
| Vane Pump Housing Rear At Power Steering Pump Heat Insulator | 44 | 449 | 32 | |
| Pressure Feed Tube Assy At Vane Pump Assy | 44.1 (41) | 450 (414) | 33 (30) | |
| POWER STEERING LINK ASSY | ||||
| Control Valve Housing At Rack Housing | 21 | 214 | 15 | |
| Rack Guide Spring Cap Lock Nut | 28 (39) | 286 (398) | 21 (29) | |
| Power Steering Rack At Steering Rack End Sub-Assy | 60 (83.4) | 614 (850) | 44 (61) | |
| Tie Rod End Sub-Assy Lock Nut | 74 | 750 | 54 | |
| Steering Right & Left Turn Pressure Tubes | 12 (13) | 118 (133) | 9 (10) | |
| Power Steering Link Assy Set Bolt | 74 | 749 | 54 | |
| Steering Intermediate Shaft Set Bolt | 28 | 290 | 21 | |
| Power Steering Rack Housing Heat Insulator Set Bolt | ||||
| (a) | 18 | 178 | 13 in.lbf | |
| (b) | 35 | 360 | 26 in.lbf | |
| Front Suspension Crossmember Sub-Assy Set Bolt | ||||
| A | 116 | 1,183 | 86 | |
| B | 70 | 714 | 52 | |
| Engine Mounting Insulator RR At Front Suspension Crossmember Sub-Assy | 72 | 734 | 53 | |
| Front Suspension Member Reinforcement LH & RH Set Bolt | 47 | 479 | 35 | |
| Pressure Feed Tube Assy At Power Steering Link Assy | 27 (25) | 273 (255) | 20 (18) | |
| Pressure Feed Assy Clamp Set Bolt | 7.8 | 80 | 69 in.lbf | |
| Steering Sliding Yoke Sub-Assy At Steering Intermediate Shaft | 28 | 290 | 21 | |
POWER STEERING SYSTEM TORQUE SPECIFICATIONS
(): For use without SST