DATA LIST
According to the DATA LIST displayed by the hand-held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one method to shorten work time.
- Warm up the engine.
- Turn the ignition switch to OFF.
- Connect the hand-held tester to DLC3.
- Turn the ignition switch to ON.
- Operate the hand-held tester according to the steps on the display and select "DATA LIST".
ALL (ECM)
| Item | Measurement Item/Range (Display) | Normal Condition | Diagnostic Note |
|---|---|---|---|
| VEHICLE SPEED | Vehicle speed / Min.: 0 km/h, Max.: 255 km/h | Almost same at the meter speed (When driving) | |
| ENGINE SPD | Engine speed / Min.: 0 RPM, Max.:16,383 RPM | Almost same at the meter RPM (When engine is running) | |
| COOLANT TEMP | Coolant Temperature / Min.: -40°C(-104 °F), Max.: 140°C (284°F) | After warming up: 80 to 95°C (176 to 203°F) | If the value is "-40 °C (-104°F)" or "140 °C (284°F)", sensor circuit is open or shorted. |
DATA LIST
ABS (Brake Actuator)
| Item | Measurement Item/Range (Display) | Normal Condition | Diagnostic Note |
|---|---|---|---|
| SPD1 | Vehicle speed / Min.: 0 km/h, Max.: 255 km/h | Almost same at the meter speed (When driving) |
ABS (BRAKE ACTUATOR)