Introduction: Other Scion tC II

CUSTOMIZE PARAMETERS

1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451052-S10418493742012020700000)
2. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451053-S25505339362012020700000)
3. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451054-S01354626022012020700000)
4. CUSTOMIZE SMART KEY SYSTEM (for Entry Function) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451055-S29045123662012020700000)
5. CUSTOMIZE SMART KEY SYSTEM (for Start Function) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451056-S10746111662012020700000)
6. CUSTOMIZE LIGHTING SYSTEM (INT) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451057-S19382801392012020700000)
7. CUSTOMIZE METER / GAUGE SYSTEM . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451058-S27343897152012020700000)
8. CUSTOMIZE SEAT BELT WARNING SYSTEM . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451059-S37449887832012020700000)
9. CUSTOMIZE LIGHTING SYSTEM (EXT) . Refer to «CUSTOMIZE PARAMETERS - Step 1»(ref-451060-S13759303812012020700000)

INITIALIZATION

1. PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL Necessary Procedures Effect / Inoperative Function when Necessary Procedures is not Performed See Reset back door unlock position Back door unlock function Refer to «INITIALIZATION»(ref-451052-S28954280362012020700000) NOTE: After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.
2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED Replacement Part Necessary Procedures Effect / Inoperative Function when Necessary Procedures are not Performed See ECM Register VIN. DTC P0630 is output Refer to «REGISTRATION»(ref-451061-S18147329012012020700000) Automatic transaxle assembly Transaxle compensation code input Road test Reset memory Large shift shock Refer to «PRECAUTION»(ref-451062-S40043423382012020700000) Valve body assembly Shift solenoid valve SL3 and/or 4 Transaxle compensation code initialize Road test Reset memory Large shift shock Shift solenoid valve SL1 and/or 2 Road test Large shift shock TCM (If possible, read the transaxle compensation code from the previous TCM) Possible Transaxle compensation code input (Into the new TCM) Reset memory Road test Large shift shock Impossible Transaxle compensation code initialize Reset memory Road test Large shift shock Tire pressure warning ECU Register transmitter IDs. Initialize tire pressure warning system. When DTC detection conditions of "transmitter ID not received" DTC is met, tire pressure warning light blinks for 1 minute, and then illuminates Tire pressure monitoring function Refer to «REGISTRATION»(ref-451063-S16731181702012020700000) for Registration Refer to «INITIALIZATION»(ref-451063-S14104837772012020700000) for Initialization Tire pressure warning valve and transmitter Yaw rate and acceleration sensor Clearing zero point calibration data Yaw rate and acceleration sensor zero point calibration Steering angle sensor zero point calibration VSC control is prohibited or operation is incorrect Refer to «CALIBRATION»(ref-451051-S12366374272012020700000) Skid control ECU (Brake actuator assembly) Clearing zero point calibration data Yaw rate and acceleration sensor zero point calibration Steering angle sensor zero point calibration VSC control is prohibited or operation is incorrect Refer to «CALIBRATION»(ref-451051-S12366374272012020700000) Steering angle sensor (Spiral cable sub-assembly) Clearing zero point calibration data Yaw rate and acceleration sensor zero point calibration Steering angle sensor zero point calibration VSC control is prohibited or operation is incorrect Refer to «CALIBRATION»(ref-451051-S12366374272012020700000) Power steering ECU Power steering column assembly Perform rotation angle sensor initialization and torque sensor zero point calibration Power steering warning light comes on EPS control Refer to «CALIBRATION»(ref-451064-S12427632812012020700000) Door control receiver assembly (w/o Smart Key System) Registration Wireless door lock control system (w/o Smart Key System) Refer to «REGISTRATION»(ref-451054-S12563870702012020700000) Key (w/o Smart Key System) Steering lock actuator assembly (w/ Smart Key System) Registration Wireless door lock control system (w/ Smart Key System) Entry operation Engine start (w/ Smart Key System) Steering lock and unlock Refer to «REGISTRATION»(ref-451065-S16272258382012020700000) Certification ECU (w/ Smart Key System) ID code box (w/ Smart Key System) Key (w/ Smart Key System) Transponder key ECU (w/o Smart Key System) Registration Engine starting (w/o Smart Key System) Refer to «REGISTRATION»(ref-451066-S08818932002012020700000) Key (w/o Smart Key System) Occupant classification ECU Perform zero point calibration Registration ECU data Occupant classification system Passenger airbag ON/OFF indicator Airbag system (Front passenger side) Seat belt warning system (Front passenger side) Refer to «INITIALIZATION»(ref-451067-S42898616702012020700000) Sliding roof drive gear sub-assembly (Sliding roof ECU) Sliding roof housing Sliding roof glass Initialize sliding roof drive gear sub-assembly Auto operation Jam protection function Sliding roof operation after ignition switch is turned off Refer to «INITIALIZATION»(ref-451068-S07861988662012020700000)

GLOSSARY OF SAE AND SCION TERMS

This glossary lists all SAE-J1930 terms and abbreviations used in this information in compliance with SAE recommendations, as well as their SCION equivalents.