Secondary and Configurable Customer Controls: Other Saturn VUE II

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

Reference Information

Schematic Reference

Steering Wheel Secondary/Configurable Control Schematics

Connector End View Reference

1. «Entertainment/Communication Connector End Views»(ref-269298-S06687157392007103000000)
2. «Secondary/Configurable Control Connector End Views»(ref-269369-S38348599962007103000000)

Description and Operation

Steering Wheel Controls Description and Operation

Electrical Information Reference

1. «Circuit Testing»(ref-269314-S07587694522007103000000)
2. «Connector Repairs»(ref-269314-S42425630472007103000000)
3. «Testing for Intermittent Conditions and Poor Connections»(ref-269314-S15883928412007103000000)
4. «Wiring Repairs»(ref-269314-S29032250872007103000000)

Repair Procedures

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

1. «Steering Wheel Control Switch Assembly Replacement»(ref-269369-S05308114792007103000000)
2. «Control Module References»(ref-269316-S24390412312007103000000) for Radio replacement, setup, and programming

Enter Programming

To enter Programming with the Tech 2, perform the following actions

1. Install the scan tool.
2. Turn ON the ignition, with the engine OFF.
3. Select the correct vehicle and model year.
4. Select F1: Body Control Module
5. Select F2: Special Functions
6. Select F2: Personalization

Setting Options

Select an option with the UP/DOWN ARROW keys. The selected option will be highlighted. Use the SIDE TO SIDE ARROW keys to activate or deactivate the highlighted options, an ASTERISK will be displayed when an option has been ACTIVATED. Use the SOFT keys to save the selected options or use the EXIT key to leave the options unchanged. After all options have been selected press the SOFT key to continue.

The following is a list of the selectable options

1. F0: Pre-alarm Option
2. F1: CTD Operation
3. F2: Door Lock Operation
4. F3: Fob Feedback
5. F4: Afterblow Option

Pre-alarm Option

Refer to Theft Systems Description and Operation for information.

Fob Feedback

Refer to Keyless Entry System Description and Operation for information.

Afterblow Option

Refer to SIR System Description and Operation for information.