Tools Required
CH-47672 Frame Insulator Remover/Installer. See Special Tools and Equipment .
Length
Centerline length measurements are 3-dimensional measurements. The 3 dimensions are the following
- Length - The distance between 2 points when the height is parallel to the center plane.
- Height - The measurement is parallel to the datum plane.
- Width - The measurement is parallel to the center plane.
When reading dimension charts, horizontal width and length dimensions of the underbody are shown as viewed from the bottom of the underbody. Vertical dimensions use the datum plane as a base for all vertical (height) measurements.
Centerline measurements are used with universal measuring equipment.
Scheme 6
The vertical body zero line is an imaginary line drawn through the frame either at the forward or rearward torque box area of the frame.