Brake Fluid Irritant Caution
| CAUTION | Brake fluid may irritate eyes and skin. In case of contact, take the following actions: Eye contact-rinse thoroughly with water. Skin contact-wash with soap and water. If ingested-consult a physician immediately. |
Checking Hot Transmission Fluid through Drain Plug Hole Caution
| CAUTION | The engine must be running when the transmission fluid fill plug is removed, or excessive fluid loss will occur. Transmission fluid may be hot. Since the actual fluid level is unknown, stand clear when removing the fill plug. Have a container ready to capture any lost fluid. Do not turn the engine off with the fill plug removed, as you can be injured by hot transmission fluid being expelled out of the oil fill opening. |
Brake Fluid Effects on Paint and Electrical Components Notice
Note. Avoid spilling brake fluid onto painted surfaces, electrical connections, wiring, or cables. Brake fluid will damage painted surfaces and cause corrosion to electrical components. If any brake fluid comes in contact with painted surfaces, immediately flush the area with water. If any brake fluid comes in contact with electrical connections, wiring, or cables, use a clean shop cloth to wipe away the fluid.
Heated Oxygen Sensor (HO2S) Resistance Learn Reset Notice
Note. When replacing the HO2S perform a code clear with a scan tool, regardless of whether or not a DTC is set. Performing a code clear will reset the HO2S resistance learned value. Failure to perform a code clear may result in an HO2S failure.