Fastener Tightening Specifications
| Application | Specification |
|---|
| Metric | English |
| Ball Stud to Steering Knuckle Nut |
| First Pass | 50 N.m Reverse nut 3/4 turn | 37 lb ft Reverse nut 3/4 turn |
| Second Pass | 50 N.m + 30° | 37 lb ft +30° |
| Frame Support Bracket to Body Bolt |
| First Pass | 100 N.m | 74 lb ft |
| Final Pass | +90° |
| Hub and Bearing Assembly Bolts | 115 N.m | 85 lb ft |
| Lower Control Arm Bushing to Frame Bolts |
| First Pass | 50 N.m | 37 lb ft |
| Second Pass | +90° |
| Lower Control Arm to Bushing Bolt | 44 N.m | 32 lb ft |
| Outer Tie Rod to Steering Knuckle Nut |
| First Pass | 20 N.m | 15 lb ft |
| Second Pass | +180° |
| Verify torque | 50 N.m | 37 lb ft |
| Rear Frame to Body Bolts |
| First Pass | 100 N.m | 74 lb ft |
| Final Pass | +90° |
| Stabilizer Link Nut | 65 N.m | 48 lb ft |
| Stabilizer Shaft Clamp Bolts | 25 N.m | 18 lb ft |
| Steering Knuckle to Strut Bolts and Nuts | 120 N.m | 89 lb ft |
| Upper Strut Cap to Body Nuts | 25 N.m | 18 lb ft |
| Upper Strut Shaft Nut | 70 N.m | 52 lb ft |
| Wheel Drive Shaft Nut | 215 N.m | 159 lb ft |
