Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
Reference Information
Schematic Reference
Steering Wheel Secondary/Configurable Control Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Steering Wheel Controls Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-301517-S12739748792008101700000)
- «Connector Repairs»(ref-301517-S02286547552008101700000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-301517-S37460750252008101700000)
- «Wiring Repairs»(ref-301517-S19995224182008101700000)
Scan Tool Reference
Control Module References
Circuit/System Verification
Ensure the primary controls of the associated component are functioning properly.
Repair Procedures
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
- «Steering Wheel Control Switch Assembly Replacement»(ref-301557-S10843989942008101700000)
- «Control Module References»(ref-301518-S12838675482008101700000) for radio replacement, setup, and programming
Scheme 2
| Callout | Component Name |
|---|---|
| CAUTION: Refer to SIR Caution . Preliminary Procedure: Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement . | |
| 1 | Steering Wheel Trim Cover Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in) |
| 2 | Steering Wheel Trim Cover (Qty: 2) |
| 3 | Steering Wheel Control Switch Assembly (Qty: 2) Tip: Disconnect the electrical connectors. Make sure the steering wheel control switches are properly seated to the steering wheel trim cover during installation. |
| CAUTION |
|---|
| Refer to SIR Caution . |
| NOTE |
|---|
| Refer to Fastener Notice . |