WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
Note. See SPECIFICATIONS & PROCEDURES article in the WHEEL ALIGNMENT Section.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Ball Joint Nut | 32-41 (43-56) | |
| Bracket-to-Lower Control Arm Nut | 70-77 (95-104) | |
| Bracket-to-Upper Control Arm Nut | 54-66 (73-89) | |
| Hub Nut | ||
| 900 Series | 213-227 (289-308) | |
| 9000 Series | 195-208 (264-282) | |
| Lower Shock Absorber Mount Bolt | 70 (95) | |
| Steering Knuckle-to-Strut Bolt | 56-75 (76-102) | |
| Strut Mount Nut (Top) | 22-29 (30-39) | |
| Strut Shaft Nut | 49-59 (66-80) | |
| Tie Rod End-to-Steering Knuckle | 35-44 (47-60) | |
| Wheel Lug Nut | ||
| 900 Series | 65-80 (88-108) | |
| 9000 Series | 76-90 (103-122) | |
| Other Bolts | ||
| 5 mm | 4 (5) | |
| 6 mm | 7 (10) | |
| 8 mm | 15 (20) | |
| 10 mm | 30 (40) | |
TORQUE SPECIFICATIONS