SID 2
With the ignition ON, hold down the CLEAR and SET keys at the same time for more than 4 seconds.
Enter the required unit by "scrolling" with the (Dot-) or (Arrow+) keys and press SET or CLEAR to select the unit.
When the unit has been selected, the language will be shown in the top row. Enter the required language using the (Dot-) or (Arrow +) key and select with CLEAR or SET.
The setting can also be concluded by pressing the NIGHT PANEL key or turning the ignition off.
Scheme 306
There are two trip computer variants, SID 1 and SID 2.
The trip computers SID 1 and SID 2 have the following functions in common
- TEMP (outside temperature)
- DTE (distance on remaining fuel).
- FUEL (average fuel consumption)
- SPD (average speed)
The SID 2 trip computer has the following additional functions
- DIST (distance to destination)
- ARRIVAL (arrival time)
- ALARM (time alarm)
- SPD W (speed warning)
The trip computer is operated with the buttons under the display. To carry out the calculations required to display the above information, the SID uses the following information
Scheme 307
- Time, "own" clock
- Vehicle speed, unit km/h (mph)
- Fuel level, unit litre (gallon)
- Odometer reading, unit km (miles)
- Fuel consumption since starting, unit ml