Fastener Tightening Specifications
| Application | Specification |
|---|
| Metric | English |
| Propeller Shaft Bolts | 36 Nm | 27 lb ft |
| Support Bearing Mounting Bolts | 58 Nm | 43 lb ft |
| Application | Specification |
|---|
| Metric | English |
| Differential Bushing Bolts | 108 Nm | 80 lb ft |
| Differential Clutch Bolts | 30 Nm | 22 lb ft |
| Differential Clutch Cover Bolts | 6 Nm | 53 lb in |
| Differential Clutch Control Module Bolts | 6 Nm | 53 lb in |
| Differential Clutch Oil Inspection Plug | 14 Nm | 10 lb ft |
| Differential Clutch Pump Bolts | 6 Nm | 53 lb in |
| Lubricant Drain Plug | 25 Nm | 18 lb ft |
| Lubricant Fill Plug | 25 Nm | 18 lb ft |
| Propeller shaft Flange Nut | 100 Nm | 74 lb ft |
| Rear Axle Assembly Mounting Bolts |
| First Pass | 90 Nm | 66 lb ft |
| Final Pass | Additional 100 degrees |
| Rear Axle Bolts | 30 Nm | 22 lb ft |
Lubrication Specifications
| Application | Quantity |
|---|
| Metric | English |
| Differential Clutch Without Limited Slip Differential Clutch | 0.52 liters | 0.55 quarts |
| Differential Clutch With Limited Slip Differential Clutch | 0.56 liters | 0.59 quarts |
| Limited Slip Differential Without Limited Slip Differential Clutch | 0.6 liters | 0.63 quarts |
| Limited Slip Differential With Limited Slip Differential Clutch | 0.65 liters | 0.69 quarts |
| Limited Slip Differential (Limited Slip Additive) | .05 liters | 0.52 quarts |
| Transfer Case | 0.66 liters | 0.70 quarts |
| Application | Specification |
|---|
| Metric | English |
| Transfer Case Bracket-to-Engine Bolts | 22 Nm | 16 lb ft |
| Transfer Case Bracket-to-Rear Extension Housing Bolts | 58 Nm | 42 lb ft |
| Transfer Case-to-Transmission Bolts | 110 Nm | 81 lb ft |
| Transfer Case-to-Transmission Bolts - RPO MXE |
| First pass | 100 Nm | 73 lb ft |
| Second pass | 60 degrees |
| Transfer Case Housing-to-Rear Extension Housing Bolts |
| First pass | 25 Nm | 18 lb ft |
| Second pass | 130 degrees |
| Transfer Case Oil Fill Plug | 40 Nm | 30 lb ft |
| Transfer Case Oil Drain Plug | 40 Nm | 30 lb ft |
| Transfer Case Rear Output Shaft Flange Bolts | 35 Nm | 25 lb ft |
| Transfer Case Vent | 25 Nm | 18 lb ft |
Approximate Fluid Capacities
| Application | Specification |
|---|
| Metric | English |
| Transfer Case Oil GM P/N 19256084 (Canadian P/N 19256085) | 0.65 L | 0.69 qt |
