Home ReviewsRefund
Home/RAM/Pickup 1500/RAM Pickup 1500 (2011-2012)/Repair manual/Front Suspension & Wheel Alignment/RIGHT
Contents Wiring diagrams Section: Front Suspension & Wheel Alignment All sections

RIGHT RAM Pickup 1500

Front Suspension & Wheel Alignment ~103 words

RIGHT

Note. Discard the nuts and bolts and do not reuse. New nuts and bolts should be used when replacing or servicing the control arms.

  1. Position the upper control arm (2) at the axle and frame rail.
  2. Install the bolts, then finger tighten the nuts (1).
  3. Tighten nut at the axle bracket and frame bracket to specifications. Refer to «SPECIFICATIONS»(ref-457771-S11676084182012030200000) .
  4. Remove the support for the axle.
  5. Install the exhaust system back into place.
  6. Reconnect the rubber exhaust mounts.
  7. Reconnect the exhaust (2) at the manifold(s) (1).
  8. Reconnect the exhaust bracket (4) at the transmission.
  9. Remove the supports and lower the vehicle.