Removing support
Installation Location
Scheme 707
Note. When removing the support, do not loosen the retaining clips by placing the screwdriver between the retaining clips and the rear end ribs! Use new retaining clips for installation.
Scheme 708
1. Move retaining clips -3- as far as possible to one side and open up with a screwdriver -4- -Arrow A- Remove retaining clips -3-. (Scheme 709)
2. Disengage support -2- in -direction of Arrow B- from rear apron -1-. (Scheme 709)
Installation Location
Scheme 709
Scheme 710
1. Carefully press out the cover cap -2- with a screwdriver. The securing cord -3- the cover cap -2- and the rear end -1- are joined as they pull out. (Scheme 711)