Coding country coding
Note. The Euro Home Link (RoW variant) must be coded for various countries because of diverse national frequency registrations and modulations.
Press keys I and III on the Home Link to set regional codes (country codes for Europe) and keep them pressed for approx. 30 seconds until the LED goes out (the LED flashes after 20 seconds and goes out after another 10 seconds).
1. Release the keys.
2. Press keys I and III on the Home Link again and press key II briefly after approx. 1 second.
3. The number of flashes indicates the country code (continue to hold down the outer keys I and III).
| One flash | Rest of Europe (e. g. Germany) |
|---|---|
| Two flashes | France |
| Three flashes | U. K. |
| Four flashes | Italy |
4. The country code can now be incremented by pressing the II key. Each time you press the II key, another country is set. After 4 flashes, it returns to one flash, e. g. for Germany.
5. Release all keys once you have set the country coding.
6. Press keys I and III for approx. 20 seconds to get into Training mode (the LED flashes slowly after about 20 seconds).
7. Original hand-held transmitters can now be taught. > 967919 Removing and installing garage door opener control unit - "Coding" .
Frequencies
| Rest of Europe | 27, 40, 433 MHz |
|---|---|
| France | 27, 30, 40, 433 MHz |
| U. K. | 27, 40, 418, 433 MHz |
| Italy | 27, 30, 40, 433 MHz |
France and Italy have different channel rasters.