General warning notes
| WARNING | Incorrect handling of airbag units! (Part 1) Danger of injury and material damage as a result of exploding airbag |
> Please observe the following points
> The airbag units are pyrotechnical items in hazard class T 1!
> Handling, transport and storage of these units must conform to hazardous goods regulation and explosives legislation!
> The listed statutory requirements. Refer to the Federal Republic of Germany!
> The relevant valid regulations must be observed in all other countries!
> The commencement of work with pyrotechnical items must be reported 14 days in advance to the Trade Supervisory Office (responsible authority)!
> Airbag units must only be dispatched in transport packaging officially approved for that purpose!
> Internally and otherwise, they must always be transported in the luggage compartment or cargo hold of a vehicle using the above-mentioned transport packaging!
> They must not be transported in the passenger compartment!
> Airbag units must be stored in accordance with the second ordinance of the explosives legislation!
> This ordinance stipulates that small quantities of materials and items may be stored at certain locations without special storage approval!
| WARNING | Incorrect handling of airbag units! (Part 2) Danger of injury and material damage as a result of exploding airbag! |
> Please observe the following points
> Airbag units must be kept in a locked place!
> When storing airbag units, ensure that the airbag opening faces upwards (risk of injury caused by inflation of the airbag units in the event of accidental ignition)!
> Airbag units must be stored in a dry place and must not be stored together with other hazardous goods (varnishes, etc.)!
> Loose airbag units, referred to as airbag modules below, or airbag modules installed in a loose steering wheel must never become the actual (physical) property of the customer!
> The possession of loose airbag modules not installed in the vehicle is not permissible in the private sector!
> Airbag modules may become the property of the customer only when installed in the vehicle!
> Airbag modules must not be deposited on a metallic surface.