Installing
| CAUTION | Risk of injury (e. g. crushing) when removing and installing springs. Danger of injury and damage. Springs can pop out. The edges of springs may be sharp. |
> Wear protective gloves and goggles.
> Be very careful when working on the brake system.
Installation is performed in reverse order.
Align the entire unit in the middle.
Observe correct tightening torques.
1. Install brake disc and brake calliper. Refer to 465319 Removing and installing rear brake disc [9PAAD1 9PAAD7 9PAAE1 9PAAE7 9PAAF1 9PAAJ1] .
2. Pull the auxiliary pin out of the adjustment device.
3. Adjust the foot-operated parking brake. Refer to 468316 Adjusting the foot-operated parking brake [9PAAD1 9PAAD7 9PAAE1 9PAAE7 9PAAF1 9PAAJ1] .
4. Fit wheel. Refer to 44 05 19 Removing and installing wheel - as of MY 2003 (All Models) .
5. Install trim under instrument panel on driver's side. Refer to 70 19 19 Removing and installing trim under dashboard - as of MY 2003 (All Models) .
6. Install cover in the footwell. Refer to 70 22 19 Removing and installing cover under dashboard - as of MY 2003 (All Models) .
Poses Online