Group 1 - Engine
| WARNING | Suspended load! Risk of serious crushing and injury |
> Do not work at or under a suspended load.
> Never reach in between the engine and components during installation or removal.
> Wear protective safety gear.
| CAUTION | Leaks due to components being at too low a temperature or at different temperatures! If components that are cold or at different temperatures are sealed together by the application of sealant, adhesion problems and leaks can arise due to the build-up of condensation water or component distortion. |
> Components must have reached at least 17°C throughout.
> Components must not be too hot (distortion).
> Spare parts that are stored in the cold or heat (strong sunlight), must be brought to room temperature or the same temperature as other parts before installation.