General information on the fault memory
The control unit can store up to (X) different faults simultaneously. If all (X) fault memories are occupied, the new fault overwrites the oldest fault. The fault memory content of the 'transverse lock control unit' is maintained even in the removed state.
Fault overview - transverse lock control unit
| Fault code | Fault text | Fault effect |
|---|---|---|
| 532 | Voltage supply | The functions available in the transverse lock control unit cannot be activated |
| 778 | Steering-angle sensor | |
| 1312 | CAN drive | |
| 1314 | DME control module | |
| 1316 | PSM control unit | |
| 1317 | Instrument cluster | |
| 2035 | Potentiometer 1, transverse lock | |
| 2036 | Potentiometer 2, transverse lock | |
| 2038 | Voltage supply to sensors | |
| 2052 | Control unit switched off due to excess temperature | |
| 2053 | Transfer box control unit | |
| 2055 | Voltage supply to transverse lock servo motor | |
| 2056 | Ground supply to transverse lock servo motor | |
| 2057 | Voltage supply to brake for servo motor (A) | |
| 2058 | Ground supply to brake for servo motor (B) | |
| 2059 | Servo motor temperature sensor | |
| 2062 | Transverse lock mechanical fault | |
| 2373 | Current sensor in control unit | |
| 2409 | Servo motor brake | |
| 2412 | Transverse lock, rear | |
| 16344 | Control unit faulty | The functions available in the transverse lock control unit cannot be activated |
| 16346 | Control unit faulty | The functions available in the transverse lock control unit cannot be activated |
| 16347 | Control unit faulty | The functions available in the transverse lock control unit cannot be activated |
| 16353 | Control unit malfunction | The functions available in the transverse lock control unit cannot be activated |
FAULT REFERENCE CHART
See also:
• OBD (II)