Removing engine mounting
| WARNING | Danger of injury! |
> When working on the engine suspension, the engine must be appropriately secured against falling or lowering.
> Never use defective lifting equipment.
> Only use lifting equipment tested and approved by Porsche.
> The components are very heavy. There is a danger of crushing.
> Wear protective gloves.
> Please observe general warning notes.
Note. This task can only be performed in the Cayenne S (M48/00) if the engine has been removed or suspended on the body. This description covers suspension on the body. The engine must be removed on the Cayenne Turbo (M48/50) > 100119 Removing and installing V8 4.5 l engine - "Removing" . The turbochargers are removed next. Refer to 21 30 21 Removing turbocharger - as of MY 2003 (Cayenne Turbo, Cayenne Turbo S) .
1. Undo the two fastening screws -Arrows- to the left and right on the hydraulic mounts. (Scheme 250)
2. Undo the two fastening screws from the engine carrier to the body and remove the engine carrier. -center arrow- (Scheme 250)
3. Undo engine mounts. To do this, undo the fastening nuts on the support arms and remove the engine mounts.