Notes on replacing pressure hoses
Note. Faulty pressure hoses can be replaced in sections. Using a plug connection (see Spare Parts Catalogue), individual sections of pressure hoses can be safely joined again. The pressure hoses are correctly fitted when the first color marking (self applied) is no longer visible and the second color marking is still visible. To check that the pressure hose is fitted correctly, pull it slightly against the insertion direction. If it is fitted correctly, it cannot be pulled out or only pulls out when great force is applied.
Scheme 85
The following points must be observed when choosing the repair point
The repair point must lie in an area protected from water spray
The push-on connector must be fastened with tie-wraps to the structure or a cable guide
Straight pipe sections should be chosen for the repair
Position the pressure hose back in its original fastenings
Insert the ends of the pressure hoses firmly into the push-on connector.