Installing fuel filter
1. Fit new seal in the opening of the tank.
2. Connect filter unit. Mount the electric connector -1 and 2- and the hose connections -3 and 4-. see scheme 122
3. Place the connection unit into the tank. When doing so, make sure that the plastic lug is pointing forwards.
1. Close the tank. To do so, fit the sheetmetal ring and tighten using the key T10202 . --> Tightening torque: 104 ftlb.
2. Fit all connections (fuel lines, ventilation tubes and electric plugs).
3. Fit the lid. Then tighten the four fastening nuts. --> Tightening torque: 7.5 ftlb. Refit carpeted floor and fix with double-sided adhesive tape.
4. Tighten the seat-belt buckle fastening plates. Use three new fastening screws for this and tighten. For tightening torque, refer to 69 25 19 Removing and installing rear belt lock - as of MY 2003 (All Models) .
5. Fold rear seat down again.
6. Fill fuel tank (refuel). > Draining and filling fuel
1. Fill fuel tank (refuel). > Draining and filling fuel
Designation Type Number Explanation Porsche System Tester ll special tool 9588 Pressure gauge special tool P 378a Connection line special tool P 9559 measurement tool set special tool P 9684 Measuring adapter special tool P 9705 Connecting lead special tool P 9705/1