Subsequent work for compressor
1. Check Pentosin level in power-steering reservoir Refer to 48 02 01 Checking the fluid level for the power-assisted steering - as of MY 2005 (All Models) .
2. Install rear underbody cover. Refer to 51 94 19 Removing and installing cover for rear underbody - as of MY 2005 (All Models) .
3. Install rear wall cover Refer to 55 59 19 Removing and installing rear wall cover - as of MY 2005 (All Models) .
4. Install engine compartment lid Refer to 55 78 19 Removing and installing engine compartment lid - as of MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
5. Fill refrigerant on the air-conditioning system in accordance with regulations. > 870317 Draining and filling in refrigerant
6. Open air exhaust nozzles on the dashboard, and set fan to at least 75 %.
7. After allowing the system to stabilize at idle speed (approx. 5 sec.), switch on air conditioner and allow the engine to run uninterrupted for at least 2 minutes at 1500 rpm.
8. Switch off the air conditioner again. Do not drive until the air conditioner has been filled.
9. Start engine. Turn the steering wheel from stop to stop while the engine is running in order to bleed the steering system.