REMOVING AND INSTALLING AIR/OIL SEPARATOR
Engine removed
Engine in working position (engine turned 180°)
Scheme 867
| No. | Designation | Qty. | Installation |
|---|---|---|---|
| 1 (1) | Oil drain plug M18 x 1.5 | 1 | |
| 2 (1) | Sealing ring A18 x 24 | 1 | Always replace |
| 3 (1) | Hexagon-head bolt M6 x 16 | 13 | |
| 4 (1) | Oil pan | 1 | Clean sealing surface and apply silicone bead |
| 5 (1) | Hexagon-head bolt M6 x 16 | 3 | |
| 6 (1) | Bulkhead box | 1 | |
| 7 (1) | Hexagon-head bolt M6 x 20 | 1 | |
| 8 (1) | Hexagon-head bolt M6 x 20 | 1 | |
| 9 (1) | Air/oil separator | 1 | |
| 10 (1) | O-ring 12 x 2 | ||
| 11 (1) | Hexagon-head bolt M6 x 20 | 1 | |
| 12 (1) | Hexagon-head bolt M6 x 12 | 1 | |
| 13 (1) | Air/oil separator | 1 | |
| 14 (1) | O-ring 12 x 2 | 1 | Lightly oiled |
| 15 (1) | Hexagon-head bolt M6 x 20 (micro-encapsulated) | 2 | Replace |
| 16 (1) | Oil suction pipe | 1 | |
| 17 (1) | O-ring 30 x 3 | Lightly oiled | |
| 18 (1) | Hexagon-head bolt M6 x 12 | 1 | |
| 19 (1) | Holder for oil probe | 1 | |
| 20 (1) | Grommet 9.5 x 18 x 1.2 | 1 | |
| (1) For explanation (Scheme 876) | |||
| (1) | For explanation (Scheme 876) |
REMOVAL AND INSTALLATION PROCEDURE FOR ENGINE LUBRICATION