INSTALLING MAIN HEADLIGHT Porsche Boxster 986

INSTALLING MAIN HEADLIGHT

Note. Do not attach any covers (for example, stone shields or films) in the area of the headlights.

Scheme 81

Scheme 82

Scheme 83

1. Insert the headlight into the guide rails and push it fully into the wing -arrow-. see scheme 85
2. Press the headlight to the rear, turning the socket wrench at the same time until the wrench points horizontally to the rear -arrow C-. In the process, the headlight lock must engage with an audible and perceptible click. see scheme 85
3. Check the correct seating of the headlight, for example, by pulling gently in the area of the fog light.
4. Insert rubber stopper in the release opening.
5. Screw the side carpet tight with the plastic screw -A-. see scheme 87