Removing support
Installation Location
Scheme 706
Note. When removing the support, do not loosen the retaining clips by placing the screwdriver between the retaining clips and the rear end ribs! Use new retaining clips for installation.
Scheme 707
1. Move retaining clips -3- as far as possible to one side and open up with a screwdriver -4- -Arrow A- Remove retaining clips -3-. (Scheme 708)
2. Disengage support -2- in -direction of Arrow B- from rear apron -1-. (Scheme 708)
Installation Location
Scheme 708
Scheme 709
1. Carefully press out the cover cap -2- with a screwdriver. The securing cord -3- the cover cap -2- and the rear end -1- are joined as they pull out. (Scheme 710)