Preliminary work for triggering unit
Note. If a new control unit has to be installed, read out as much of the data from the old control unit as possible using the PIWIS Tester P 9718 .
1. Disconnect battery. --> 27 06 IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY - AS OF MY 2005 (ALL MODELS) .
2. Remove left and right covers of console. Refer to 68 14 19 Removing and installing center console cover - as of MY 2005 (All Models) .
3. Remove center console cover. Refer to 68 19 19 Removing and installing cover for center console - as of MY 2005 (All Models) .
4. Remove center console. Refer to 68 17 19 Removing and installing center console - as of MY 2005 (All Models) .
5. If installed, remove control unit for tilt sensor. Refer to 96 63 19 Removing and installing tilt sensor control unit - as of MY 2005 (All Models) .