INSTALLING MAIN HEADLIGHT
Note. Do not attach any covers (for example, stone shields or films) in the area of the headlights.
Scheme 81
Scheme 82
Scheme 83
- Insert the headlight into the guide rails and push it fully into the wing -arrow-. see scheme 85
- Press the headlight to the rear, turning the socket wrench at the same time until the wrench points horizontally to the rear -arrow C-. In the process, the headlight lock must engage with an audible and perceptible click. see scheme 85
- Check the correct seating of the headlight, for example, by pulling gently in the area of the fog light.
- Insert rubber stopper in the release opening.
- Screw the side carpet tight with the plastic screw -A-. see scheme 87