Removing backrest frame
Note. Two persons are needed to remove and install the backrest frame.
1. Secure backrest frame -2- in upright position. (Scheme 30)
2. Unscrew fastening screws -1- on left and right and remove backrest frame -2- up out of the seat frame. (Scheme 30)
| WARNING | Loosen the safety-related threaded joint. Danger of injury if front seat is not screwed down correctly. |
> Always replace fastening screws for the front seat after customer service and reworking.
> It is not permissible to make alterations to the micro-encapsulated screws (e. g., use lubricant, loosen bolts, and screw them down again).
Note. Two persons are needed to remove and install the backrest frame.
1. Fit backrest frame -2- into the seat frame, position it correctly and secure with the fastening screws -1-. Tightening torque --> Tightening torque: 34 (25 ftlb.) Nm +/-4 (3 ftlb.) Nm (Scheme 31)