CAPACITIES
| Application | Cold Crank Amps @ 0°F (-18°C) | Reserve Minutes |
|---|
| 3.8L | 770 | 115 |
| Application | (1) Quantity: Qts. (L) |
|---|
| Crankcase (2) | 4.0 (3.8) |
| Cooling System (Includes Heater) | 13.0 (12.3) |
| Automatic Transaxle (3) (4) | 6.0 (5.7) |
| (1) Fluid capacities listed are approximate. Always fill to FULL mark. (2) Does not include oil filter capacity. (3) Drain and refill capacity only. Does not include torque converter. (4) Dexron-III or Dexron-IIE. |
| (1) | Fluid capacities listed are approximate. Always fill to FULL mark. |
| (2) | Does not include oil filter capacity. |
| (3) | Drain and refill capacity only. Does not include torque converter. |
| (4) | Dexron-III or Dexron-IIE. |
SERVICE INTERVALS & SPECIFICATIONS
| Component | Miles |
|---|
| Air Filter | 30,000 |
| Camshaft Timing Belt | (1) |
| Coolant | 30,000 |
| Fuel Filter | (1) |
| Oil & Filter | 7500 |
| Spark Plugs | 30,000 |
| (1) No scheduled replacement interval is given by manufacturer. Check and replace as necessary. |
| (1) | No scheduled replacement interval is given by manufacturer. Check and replace as necessary. |
| Application | (1) Tension: Lbs. (kg) |
|---|
| Serpentine Belt (2) | 50-70 (23-32) |
| (1) Specifications are for new belts only. Measure tension using belt tension gauge. (2) Engines with serpentine belts have automatic tensioner. If tension is not as specified, check belt operating length and tensioner operating range. Replace belt or tensioner as necessary. |
| (1) | Specifications are for new belts only. Measure tension using belt tension gauge. |
| (2) | Engines with serpentine belts have automatic tensioner. If tension is not as specified, check belt operating length and tensioner operating range. Replace belt or tensioner as necessary. |
