FLUID TYPE & CAPACITY
Use synthetic Gear Oil (12378514 for US; 88901045 for Canada). Fluid capacity is 2.1 qts. (1.9L).
TORQUE TUBE ASSEMBLY CLEANING AND INSPECTION
Note. The internal components of the torque tube assembly are not serviced separately. Replace the tube and internal components as an assembly.
- Inspect the torque tube for broken or cracked welds, dents or damage to the exterior of the tube, a damaged propeller shaft flange, or loose or missing dampeners.
- Inspect the propeller shaft seal surface for wear or excessive scoring. Inspect the propeller shaft splines for any unusual or excessive wear.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Axle Shaft Nut | 192 (260) |
| Brake Caliper Bolts | 33 (45) |
| Brake Caliper Bracket Bolts | 96 (130) |
| Dampener Bolt | 47 (64) |
| Differential Carrier-To-Cradle Mount Bolts | 37 (50) |
| Differential Drain & Fill Plugs | 23 (32) |
| Drive Shaft-To-Transfer Case & Torque Tube Flange Bolt (8 mm) | 24 (33) |
| Drive Shaft To Torque Tube Bolts | 24 (33) |
| Rear Suspension Knuckle Bolt & Nut | 63 (85) |
| Rear Tie Rod Bolt | 63 (85) |
| Seal Clamps - Large & Small | 100 (136) |
| Suspension Knuckle-To-Control Arm Bolt | 63 (85) |
| Tie Rod Bolt | 63 (85) |
| Torque Tube Bracket-To-Body Bolts | 41 (56) |
| Torque Tube Bracket Through-Bolt & Nut | 47 (64) |
| Torque Tube-To-Differential Bolts | 18 (25) |
| Upper Control Arm Knuckle Bolts | 63 (85) |
| Wheel Lug Nuts | 100 (140) |
| INCH lbs. (N.m) | |
| Clutch Pump Check Valve Bolts | 106 (12) |
| Parking Brake Cable Bracket | 89 (10) |
| Pinion Housing-To-Differential Bolts | 106 (12) |
| Valve Bolts | 106 (12) |
| Wheel Nut Caps | 27 (3) |
TORQUE SPECIFICATIONS