Body Control System: Overview Pontiac Aztek I

Scheme 20

Scheme 21

Scheme 22

Scheme 23

Scheme 24

Scheme 25

Scheme 26

Scheme 27

Scheme 28

Scheme 29

Begin the diagnosis of the body control system by performing the Diagnostic System Check for the system in which the customer concern is apparent.

The Diagnostic System Check will direct you to the correct procedure for diagnosing the system and where the procedure is located.

Scheme 30

Scheme 31

Test Description

The numbers below refer to the step numbers on the diagnostic table.

Scheme 32

Scheme 33

Scheme 34

1. 6. This step tests for battery voltage on the signal circuits that are not required.
2. 7. This step tests for no battery voltage on the required signal circuits.
3. 8. If any ignition switch parameters that should be inactive in the present ignition switch position are active, 2 ignition switch signal circuits may be shorted together.
4. 9. This step eliminates open circuits as the cause of the malfunction.