TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Lower Strut Attaching Nut (1) |
| Front | (2) 40 (54) |
| Rear | (2) 70 (95) |
| Tie Rod End Adjusting Sleeve Jam Nut | 55 (75) |
| Wheel Lug Nut | 80-110 (108-149) |
| (1) DO NOT turn attaching bolt. (2) Tighten to specification plus 1/4 turn. |
| (1) | DO NOT turn attaching bolt. |
| (2) | Tighten to specification plus 1/4 turn. |
ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0 | 0.4 To 0.4 |
| Rear | 0.25 | 0.75 To 0.25 |
| Caster (1) (2) | 2.8 | 1.8 To 3.8 |
| Toe-In (1) |
| Front | 0.1 | 0.1 To 0.3 |
| Rear | 0.1 | 0.1 To 0.3 |
| Toe-In (3) |
| Front | 0.05 (1.5) | 0.05 To 0.15 (- 1.5 To 4) |
| Rear | 0.05 (1.5) | 0.05 To 0.15 (- 1.5 To 4) |
| (1) Measurement is in degrees. (2) Left-to-right caster differential must not exceed 1 1/2 degrees. (3) Measurement is in inches (mm). |
| (1) | Measurement is in degrees. |
| (2) | Left-to-right caster differential must not exceed 1 1/2 degrees. |
| (3) | Measurement is in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS
