Home/Peugeot/206/Peugeot 206 I (1998-2012)/Repair manual/Engine/Coolant temperature sensor check
Contents Wiring diagrams Section: Engine All sections

Coolant temperature sensor check Peugeot 206 I

ECU information available

Actuator test: no OK

Measure parameters: yes

Characterised by: short circuit to earth

Checks to be carried out if fault is present

Short circuit to earth

conditions under which the fault appearschecks conditions for checking
voltage below 0.1 V on terminal 45 of connector 88V.NR of the injection ECU 1320control unit disconnected, ignition off, verify: - resistance between terminals 45 and 46 correct with the table of values -
-20°C46,04 kΩ≤ R1 ≤51,03 kΩ
-10°C26,44 kΩ≤ R1 ≤28,89 kΩ
0°C15,71 kΩ16,93 kΩ
+10°C9,65 kΩ10,26 kΩ
+20°C6,08 kΩ6,4 kΩ
+30°C3,93 kΩ4,12 kΩ
+40°C2,6 kΩ2,71 kΩ
+50°C1,77 kΩ1,83 kΩ
+60°C1,22 kΩ1,27 kΩ
+80°C620 Ω636 Ω