How to Replace the Navigation System Information Display Opel Vivaro A

Remove

1. 1. Disconnect battery negative lead
2. 2. Remove radio from instrument panel • Pull out using suitable radio removers • Disconnect 3x harness connector
3. 3. Remove trim panel (1) from instrument panel • Release 8x clip

4. 4. Remove navigation display unit (1) from instrument panel • Remove 2x screw • Release 4x clip • Disconnect 4x harness connector

5. 5. Remove navigation display unit (2) from support trim (3) • Remove 4x screw (1) • Release from 3x locator

Install

6. 6. Install new navigation display unit (2) to support trim (3) • Secure to 3x locator • Install 4x screw (1)

7. 7. Install navigation display unit (1) to instrument panel • Connect 4x harness connector • Secure 4x clip • Install 2x screw

8. 8. Install trim panel (1) to instrument panel • Secure 8x clip

9. 9. Install radio to instrument panel • Connect 3x harness connector • Push in to secure
10. 10. Connect battery negative lead
11. 11. Program all volatile memories