Contents Section: Front Wheel Brake All sections

Technical Data - Disk Brake Opel Vectra A

Front Wheel Brake ~150 words

Disc Brake

Disc Brake Dimensions - Front (up to MY '91):

VersionPistonBrake disc outerBrake discThickness*Minimum
diameterdiameterthickness (new)after preci-thickness
sion turning
in mmin mmin mmin mmin mm
Up to 1.8 ltr. without 4x44823612,710,79,7
As of 2.0 ltr. and with 4x4521)256242221

Disc Brake Dimensions - Front (up to MY '92):

VersionPistonBrake disc outerBrake discThickness*Minimum
diameterdiameterthickness (new)after preci-thickness
sion turning
in mmin mmin mmin mmin mm
14 NV, C 16 NZ, 16 SV4823612,710,79,7
202)182)172)
17 D, 17 DT,4823612,710,79,7
18 SV, C 18 NZ2562)202)182)172)
20 NE, 20 SEH,52256242221
C 20 NE, C 20 XE
all 4x454284242221

* After this measurement has been reached, new brake linings may only be installed once more.

1) With four wheel drive 54 mm

2) as of 10/91

Surface peak-to-valley height of new brake discs at front and rear: 0.01 mm

Disc Brake Dimensions - Front:

VersionPistonBrake disc outerBrake discThickness*Minimum
diameterdiameterthickness (new)after preci-thickness
sion turning
in mmin mmin mmin mmin mm
C 16 NZ, C 16 NZ21),48236201817
C 16 SV, X 16 SZ2561)18
17 DR, 17 DT48256201817
C 18 SV, C 18 NZ2)4825620222)17
522)242)212)
20 NE, C 20 NE,52256242221
C 20 XE, X 20 XEV543)
C 20 LET, C 25 XE54284242221

* After this measurement has been reached, new brake linings may only be installed once more.

1) Vauxhall only

2) C 18 NZ (AT) only

3) With four wheel drive

Surface peak-to-valley height of new brake discs at front and rear: 0.01 mm

Disc Brake Dimensions - Rear:

VersionPistonBrake disc outerBrake discThickness*Minimum
diameterdiameterthickness (new)after preci-thickness
sion turning
in mmin mmin mmin mmin mm
20 NE, C 20 NE,352601087
X 20 XEV, C 20 XE,
C 25 XE, all without 4x4
Vehicles with 4x4332701087
C 20 LET

Disc Brake Dimensions - Front and Rear:

UnevenPerm. lateral run-Perm. lateral run-Perm. scoringThickness ofPerm. remaining
thicknessout of removedout of installeddepthnew liningthickness of
(perm.brake discbrake discwith platelining with
tolerance)lining plate
in mmin mmin mmin mmin mmin mm
0.010.030.10.415approx. 7

* After this measurement has been reached, new brake linings may only be installed once more.

Surface peak-to-valley height of brake discs, rear: 0.01 mm