Table 7, F7:PROGRAMMING
| No. | Tech 1 Display | Conditions for checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 01 | PROGRAMMING | ||||
| COUNTRY CODE | Ignition ON |
Press key F7 in the system main menu.
Follow the instructions on TECH 1
Start programming
Once programming has started, the country code to be programmed is requested. The following countries can be selected:
· Germany (i.e. Europe except countries listed below)
· Great Britain
· Switzerland
· The Netherlands
GERMANY
GR. BRITAIN
SWITZERLAND
NETHERLANDS
| 01 | PROGRAMMING |
|---|---|
| COUNTRY CODE | If the display on the right appears after programming has been completed, the programming was successful. |
| PROGRAMMING |
COUNTRY CODE
| OKAY | |
|---|---|
| 01 | PROGRAMMING |
| COUNTRY CODE | If the display on the right appears after programming has been completed, a fault has occurred during programming. Carry out the following measures consecutively: |
· Read out trouble codes; no trouble codes may be stored
· Reprogram
· Carry out TECH 1 self-test
· Check TECH 1 cable for damaged insulation and shielding
| · Repeat programming with new control unit | PROGRAMMING |
COUNTRY CODE
| FAILED |