Engine Identification
For identification, up to 5 design-typical features are used.
Petrol engine (example) Diesel engine (example)
| C | 20 | L | E | T | 23 | DT | R | ||
|---|---|---|---|---|---|---|---|---|---|
| Specific version | |||||||||
| Mixture system | Specific version | ||||||||
| Compression group | Mixture system | ||||||||
| Engine size | Engine size | ||||||||
| Exhaust emission limit |
Exhaust emission limit Mixture system
none : ECE R 83 A (as R 15.04) E : Injection
* : ECE R 83 A (as R 15.04) Z : Central injection
C : EC 91/441/EEC, US '83 V : Carburettor
X : EC 91/441/EEC, stage 2 1) D : Diesel
Engine size Specific version (if necessary)
Displacement in litres x 10 C : Corp. Ignition System
F : Vehicles for authorities
H : High output/supercharging
I : Irmscher
Compression ratio e J : Throttled output
K : Komprex
G : e £ 8.5 L : Low output/supercharging
L : e > 8.5 - 9.0 R : Increased output
N : e > 9.0 - 9.5 T : Turbo
S : e > 9.5 - 10.0 V : Volume model
X : e > 10.0 -11.5 W : Venezuela
Y : e > 11.5 2 : Family II engine
1) Stricter limits for ca. 1996.
Engine Type Identification
As of Model Year 1993 1/2, the position of the engine codes letters has been altered.
They are not longer below the cylinder head, but are now on the cylinder block, transmission side.
Fehler! Datei kann nicht geöffnet werden!
| .P. E2283.tif | 18 | 18 | tiff;; |